Back to support page

Home
System Configuration and Display
Learn how to configure the receiver to be able to receive and display Mini Door Explorer Pro data.

System Configuration and Display
Learn how to configure the receiver to be able to receive and display Mini Door Explorer Pro data.
- Adding the Sensor to the Receiver
  You need to add the sensors to the receiver in order to display their data on Scala2.
- Configuring the System with the Positioning Option
  If the sensors have the positioning option, you need to configure the system in order to receive the trawl position and display it in Scala2.
- Configuring Data Display on Scala2
- Changing the Number of Trawls
  You need to remove specific clumps when reducing the number of trawls in water.
- Replaying Data Recorded on a Memory Card
  In Scala2, you can replay data that has been recorded in high definition on the sensor memory card.

System Configuration and Display

Learn how to configure the receiver to be able to receive and display Mini Door Explorer Pro data.

Note:

This guide refers to the following version of Scala2: 02.16.x. If you use another version, the visual interface and options may vary.