Exporting Sensor Configuration Settings for the Receiver

You can export on an XML file the sensor settings that you configured on Mosa2. You can afterward use this file when adding the sensor to a receiver.

Before you begin

  • You have finished configuring the sensor.
  • The sensor is connected to Mosa2.


  1. Click the tab Configuration.
  2. Click Config to XML.
  3. Click Apply.
    The settings are displayed.
  4. To save the settings:
    • Click Save to file to download the XML file on the computer.
    • Or, click Copy to clipboard, then press Cmd + V on a word processor like Pages to paste the contents.
  5. Change the name of the XML file saved on your computer.
    Note: When you export the sensor settings, the XML file always has the same name. Changing its name will prevent you from overwriting it the next time you download sensor settings.

What to do next

See Adding the Sensor with a Configuration File to know how to add the sensor to a receiver with this file.